NextG Lab O-RAN Testbed
Fully open-source 4G/5G O-RAN testbed built using:
- srsRAN (and OAI) for 4G/5G UE, eNB/gNB
- srsEPC/Open5GS for EPC/5G Core
- O-RAN software community code for RAN Intelligent Controller (RIC) and FlexRIC
- Software-defined radios (USRPs) UEs and COTS UEs
- Supports both SDR connections (Over-the-air and cable-based links) and ZMQ-based simulated links.
- Supports collection of data such as I/Q samples and KPMs over the “E-Lite” interface for training and testing of ML-driven xApps in the near-RT RIC for different experimental scenarios.

One 4G/5G O-RAN testbed setup with two base stations,
two COTS UEs, and one SDR UE.

Rack server hosting the Near-RT RIC that runs OSC xApps
(e.g., KPIMON xApp) as well as our in-house xApps (e.g., interference classification xApp).
5G Positioning Testbed
Full functional Open air interface (OAI) based 5G positioning testbed:
-
Currently supports Sounding Reference Signal (SRS) and capturing of Time of Arrival (ToA) measurements which can be used for positioning.
-
Utilizes an O-RAN compliant RU with 4 antennas and a COTS UE

5G positioning testbed using an
O-RAN compliant RU equipped with 4 antennas and a COTS UE
mmWave Testbed
- Established a fully operational mmWave testbed at 28 GHz, showcased in the left figure above. The setup features a transmitter and receiver, both equipped with Sivers EVK 02004s as front-end components.
- Utilized a USRP x310 at both ends, with the mmWave transmitter and receiver incorporating a Sivers EVK02004 and its integrated BFM02801 4 x 4 phased array antenna.
- The EVK enables precise control over output power, gain, beamforming, DC offset, and Local Oscillator (LO) frequency. Operating the EVK in Intermediate Frequency (IF) mode, a 4 GHz sine wave is generated using a USRP X310. The EVK’s LO frequency is configured to 24 GHz for transmitting the mmWave signal.
- Successfully conducted beam measurements (from -27 deg to +27 deg), as depicted in the figure on the right.

Milli-O-RAN

Milli-O-RAN Testbed Setup

Overview of Milli-O-RAN Testbed

ASCENT Tool
ASCENT Tool graphical user interface.
- Context-aware ASCENT spectrum sharing/interference analysis tool for satellite bands, with a case study of 12 GHz (12.2 – 12.7 GHz) band.
- You can access the ASCENT tool using the GitHub Link.
Relevant papers:
- ASCENT paper [DySPAN’24]: https://arxiv.org/pdf/2402.05273.pdf
- CAT3S paper [DySPAN’24]: https://arxiv.org/pdf/2402.04447.pdf
- Interference analysis paper [WCL’23]: https://ieeexplore.ieee.org/abstract/document/10139318
